PARAMETERS
- PEN SIZE: 135*40MM
- MOTOR: Japanese motor.8V7000rpm
- BATTERY: 2300mAh
- WORKING TIME: 5-8hours
- CHARGING TIME: 2-3hours
- STROKE: 4.2mm
- NEEDLE LENGTH: 1mm-4.5mm
- VOLTAGE: 4-12V
- MOTOR STRUCTURE: flower disc structure
- CHARGE: TYPE-C
INSTRUCTIONS
l.Long press the power button for 1.5 seconds to turn on/off the machine. Then short press the power button again for the motor to start working and start timing. Short press again to pause, double-click to reset, and long press for 1.5 seconds to turn off the machine.
2.After starting up, short press the power button to activate the motor and the display screen will light up. Short press the power button once to activate the motor, and at the same time, the display screen will display the motor operating symbol.
3. short press the voltage +/ -button once to +/-0. 1v and long press+/-continuously to+/- voltage. The voltage range is 4.0-12.0V, with a default voltage of 8V.
4. After the product shuts down, it will remember and save the current mode and gear. The next time it starts up ,it will start up according to the mode or gear learned from the previous time.
5.The display screen will automatically dim after 10 seconds, and will automatically shut down after 5 minutes when it is not working.
6. When the battery level is displayed as five levels and the voltage is low, the battery level display flashes as a reminder (the entire batter icon flashes).
7. TYPE-C charging is not working, and the entire screen only displays the charging symbol to show the actual battery level and flashes during charging.
8. Automatically detect the load, and automatically shut down if it is not connected within 5 minutes when the load is unplugged and unloaded. When reinserting in the strong start mode, it will return to the strong start mode for 0.5 seconds and then restore the set working voltage.
9. When the motor is working, the motor is stuck/short circuited. and the display screen shows an abnormal code E1l; If the motor is detected to be stuck after restarting, E1 will also be displayed, OCP protection when output over current, turn off output, display screen prompt: E2
10. Timing function: The motor starts timing, pauses without timing, and when paused, double click the power button to reset.
11.Strong start mode: Strong start symbol, non strong start symbol.When pausing after startup, press the function key M twice continuously to switch to strong start, After startup, the highest voltage will work for 0.5 seconds before restoring the screen set voltage
INSTRUCTION TO FUNCTION KEYS
Function keys: Two options can be adjusted by pressing the function key The selected option can only be adjusted by highlighting it,+/- The gear frequency can be adjusted, Pressing the function key again can switch the adjustment options. When the adjustment is highlighted, press the power button to confirm, or wait for 5 seconds for automatic confirmation.
Stinger mode: Long press the function key M to switch between prick mode and normal mode. Press the function key M once to switch to the prick frequency gear and adjust it by pressing+/-.
Memory mode: After turning on the power, click the function key M to enter the selection mode, adjust the commonly used voltage, press the power key to confirm, and the next shutdown and startup will directly freeze at the commonly used voltage., Can remember up to four commonly used voltages. Distinguish with 1-3.
